@Vernon Barry posted:Problems with the above.
#1 Green light is the power status light on the TMCC command base- Implies your power adapter is not plugged in or working.
#2 "I just got the revised cable 1050 " , problem is, typos aside, should be an MTH 50-1032 or the older cable version was 50-1007. All this cable does is connect the command base serial port to the TIU serial port so that the TIU can send TMCC formatted commands to the base. It's a one way communications TIU to base.
I would go back to basics first. Follow the basic TMCC and DCS at the same time diagram, then once you get that working, THEN worry about the 50-1032 serial data cable.
@CAPPilot did a great job with this diagrams https://ogrforum.com/topic/151...3#151069472633553813
Edit, realized that showed a TIU in passive mode- too complicated.
This edit I did based largely on previous drawings above and modified.
1050 is the only cable available. Is the power source the same as used by menards for their buildings? Does the common need to be on both commons on the output as I have 2 blocks that feed 17 sections. Thanks
