Skip to main content

Reply to "Converting 3rd Rail SD40-2 couplers"

You do need the 747 coupler for proper height if using the supplied mount. The plug for the factory coupler is on the truck bottom, as are the mounting screws. Unplug it, remove the screws and carefully work it out through the pilot. Then install the Kadee mount supplied in the box, then the Kadee coupler. It’s pretty straightforward. The model operates fine on 072 curves with Kadees.

IMG_5197IMG_5159

Attachments

Images (2)
  • IMG_5159
  • IMG_5197
×
×
×
×
×