I lay the track out, than with a pencil I mark each side of the track. Next I remove the track in large sections and place it out of the way. Track marking can go very fast depending on the size of the layout. You than mark a dash paten ------ in the middle of the two outside lines. You than work off the dash marks with half a piece of cork at a time. I use staples to secure the cork to your wood or whatever you are using for your table top. Any staples that are not driven all the way in can be tap in lightly with a hammer. This is fast,easy. The staples are easy to remove so you can reuse the cork over and over. Even if you ballast your track the cork can be used again.
|
|
