Skip to main content

Reply to "DCS Commander Issue."

If your are using the console DCS Commander 50-1028, 5 volt PS2.0 engines will not work with it; only 3 volt system engines will.

*DCS Commander works with all Proto-Sound 3.0 locomotives (including all M.T.H. HO locomotives) and with Proto-Sound 2.0 locomotives with onboard 3-volt system. Proto-Sound 2.0 three-volt systems can be identified by their square battery-charging jack on the locomotive chassis. See the operator's manual for the exact location of the charging jack.

If you're using the DCS Remote Commander 50-1033, then, as stated mutiple times above, you need to reset to factory default.
×
×
×
×
×