Skip to main content

Reply to "DCS Signal"

Engineer-Joe & PCRR/Dave,

Joe the # on the bulb is 757.

Concerning my block wiring.  I daisy chained the individual block. To get a 18v reading on the entire layout.  If the layout was a circle the block wire started at 6 and daisy chain from there to 9-12-3 on the clock.

So the center rail should be cut at 9-12-3?  And if 28v or a 18v bulb should be placed at the end of the switch.  As in Dave's picture.

×
×
×
×
×