Well if it's not the motor it is certainly above my skill level. If both motors should have the same voltage the motors should both be turning at 2 volts. I can pick any motor and connect it in parallel to the tach motor and the tach motor is flying and the other motor won't budge. I'm also not seeing any delay with other engines between the motors. Both motors start turning as soon as the thumb wheel is rolled up to 1 or 2 smph. If the tach motor starts first then it's very hard to see. Regardless, the engine is broken. I will eventually try another tach motor just to be sure.
![]() ![]() ![]()
![]() ![]() ![]()
![]() ![]() ![]()
![]() ![]() ![]()
|