Thanks Mike,
Here's Walther's video: about 5 minutes into the video shows the bridge turning.
https://www.walthers.com/products/turntable-video
===================
Turntable complete.
Last night, I added some carpenter's glue and 'yard dirt'.
This morning, the tops of the rails were cleaned and all debris was vacuumed out of the pit area.
One must insure no particles are around the bottom edge of the pit as there are fine grooves there which allows this turntable to be extremely accurate. So accurate that one can adjust the bridge by about 1/64 of an inch.
As I have mentioned, previously, this is, by far, the best turntable on the market for HO gauge for ease of setup and accuracy for aligning the bridge to the surrounding tracks. Once set up, one only needs to select which track number and hit the 'head'/'tail' button.
I used the bridge control building as the 'head' side and the other end as the 'tail' side. Last night, each track was 'set up' for the bridge.
All back to normal.
