@DoubleDAZ posted:I look forward to seeing how it all comes out. There are a couple of areas that don’t connect in SCARM, but I believe there is enough wiggle room in the track for things to connect in reality. I assumed you didn’t want to cut RealTrax, so I got the gaps as small as I could. The tracks are labeled if you can zoom in. If not I can capture and post larger images.
Dave, the tables are different heights until my son raises or lowers one. That being said I mocked up some track, if you could do your magic and see if it really fits, please. I can't bump in without losing part of my trailer park so I can add a 45 where the tables meet. If this works, could have an 054 left with a 48-inch siding. Off of the 54 left 3 - 54-inch curves, 2 - 42-inch curves, 2 - 4.25 straights going into the curve of an 054 left. The switch will feed on to the 3 x 5 that's not built yet. On the opposite side of that 054 left I used 1/2 curves as follows, 54-42-54-42-54-42- then straight to the other table. I didn't mockup the passing siding or yard as that's the easy part. I hope this makes sense.
