The trick to these is you need to pop out the plastic bearing strip to remove/replace the wheels. Look carefully right above the journal box. You will see a cut-out where the bearing strip tang catches there. There is one above each wheel. use a small bladed screw driver and push in on the tang. it will pop out. Usually only one needs to be released and the whole strip will drop out. When re-installing, be sure the catch on the strip snaps into the cut-out on the sideframe. If not the whole thing will drop out or the car will ride lop-sided. If the wheels still drop out, the strip is damaged and will need to be replaced. The part is readily available.
|
|
