Skip to main content

Reply to "Benchwork - Wiring - adding elevations"

There were some AIU's with 10A relays, but there were also some with 5A relays.  As I recall, MTH rated the box at 4 amps.  Remember, even though they added 10A relays, the board layout is still the same.  For 1 oz copper traces, to support 10 amps, the traces need to be almost .2" wide, and for internal layers they would have to be almost half an inch wide!  I suspect there is a lot more than just the relays that figure into the power rating.

×
×
×
×
×