FWIW, I had not previously used TIUs in super mode (not even 2 TIUs with different IDs).
I read up this topic and noted some of the issues others saw https://ogrforum.com/topic/sup...u-mode-with-new-wtiu
As such, I decided to try both WTIUs in home network mode- both attached to my home network set to super mode.
The DCS app on a phone works and talks to both WTIUs and was able to add 2 engines on both WTIUs and swap back and forth physically what engine on what track/WTIU and all worked.
Problem- this did not work for me with the RTC module and the remote. Basically it could talk to one WTIU but not both. Working with Mark to figure this out.
The good- I did get the RTC module to work with 2 WTIUs set to 2 different IDs 1 and 2 and that works- just cannot swap engines because they are associated with 2 different TIU IDs.
So more testing, but again this is very good and maybe even mistakes on my part. I am just not as experienced with super mode and IDs, and I'm even straying from MTH directions on how to set up super mode from MTH slightly on the network side. But I must stress- the app on a phone worked- so this at least partially makes me think my network config is working.
