Skip to main content

Reply to "Weak or NO DCS signal from TIU"

From this post and others, I have picked up many good suggestions for trouble shooting TIU issues.  It has been interesting trying to keep the clubs 14 TIUs (8 active, 6 spare) operational. summarized below are some of the TIU trouble shooting problems and" POTENTIAL" hardware causes I have picked up from the various threads.  Before addressing a potential hardware problem make sure that all TIU software setting are correct.

-Variable channels with low or no track power output, potentially a bad power FET (IRFZ44)

-Track power short on the output of any of the TIU channel, most likely a bad TVS which has shorted out (1.5KE33)

-Low or no DCS signal output on any one channel, potentially a bad transmit chip (ACT244 )

-No DCS signal on any output channel, potentially a bad receiver chip (MAX 4639). The Max4639 receives only track signal from a DCS engine

If anyone wants to add, correct or update the above list, please do.

Thanks to all the contributors,

Bob D

NJ-Hi Railers

Last edited by rad400
×
×
×
×
×