Does anyone make and sale coil coupler pigtails for ERR DC commander's coupler terminals so to use the MTH PS1 coil couplers?
Original Post
Replies sorted oldest to newest
Keith: You may want to check, my foggy head seems to think, that we are talking two different coupler voltages. You may have to replace the PS1 couplers with those available on the ERR website. Flip an email off to ERR for clarification.
Mike CT.
I understand that the PS1 couplers will work but not the PS2/3 couplers. The plugs are different between PS1 and ERR. "Boxcar" made and sold a ERR coupler pigtail, But "Boxcar" is in heaven upgrading God's trains.
CBS072 posted:I understand that the PS1 couplers will work but not the PS2/3 couplers. The plugs are different between PS1 and ERR. "Boxcar" made and sold a ERR coupler pigtail, But "Boxcar" is in heaven upgrading God's trains.
I have two plug tails, I can mail them, would need a mailing address.
Mike CT. thompsonelectric@gmail.com
I have the JST-EH connectors, pins, and crimp tool if you need any of these 2.54mm Lionel connectors.
Keith MTH has 4 electro couplers. Long or short in both Proto 1 & Proto 2 - 5 volt board are about 7 ohms. Proto 2 - 3 volt boards and Proto 3 are about 3 ohms.
That's partially incorrect. All the PS/2 and PS/3 couplers are the same at around 2.5 ohms and will NOT work with Lionel/ERR electronics. The PS/1 couplers are indeed compatible with Lionel/ERR equipment.
