Hey guys. I have the littly tiny MTH remote commander hooked up to my oval around my tree, and Lionel TMCC too. I have one MTH engine and one Lionel. Is it ok to have both of these hooked up at the same time? Or will it create problems?
As long as you only have one transformer powering the track, you should be just fine running the MTH (PS2 or PS3) engine using the DCS Remote Commander and the TMCC engine using a Cab-1, Cab-1L or Cab-2.
If you already have a transformer connected to the track, do not connect another one to the DCS Remote Commander receiver. It will work just fine in passive mode using the transformer already connected to the track.
 | Everything that you need to know about DCS is all in MTH’s “The DCS Companion 3rd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store! |
Access to this requires an OGR Forum Supporting Membership
