Skip to main content

Ok I have a z1000 pushing a MTH 50-1033.  Replaced a bridge and some track and somehow now keep popping a circuit breaker on the 1000.  Looked at all track I messed with but can’t seem to trace down what’s wrong.  Any way to isolate to narrow it down?  Thanks for any help, this group always has great ideas!

Original Post

Yes,  Do exactly what you said to do - narrow it down and isolate it.  Start by taking the bridge back out. Is the bridge and pieces of track you played with on a siding?  If so take out the first and last piece in the siding which makes it dead to the rest of your layout. Keep doing items along that line and you will get it.  Just stick with it.   Bill

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×