Hi all, just a quick question. I bought my second Legacy engine. My first one runs on 072 track and my Legacy 990 is wired to it. I plan to run my second Legacy engine on 054 track. My question is.....can i split the Legacy Command base wire to the second track(054) and then operate both trains with the Legacy remote? If not is there a way to accomplish this. thanks Pete
Replies sorted oldest to newest
Just tie the commons (outside rails) of each loop together. Also make sure that the power sources to each of those loops are in phase.
Depending on where you hook your Legacy base up to, it may already be done. If you are using a single transformer to feed both loops, just run the Legacy wire to one of the commons of the transformer.
Thank you for that quick reply. That should solve the problem! Pete
Access to this requires an OGR Forum Supporting Membership
