Skip to main content

Replies sorted oldest to newest

It may work.  Once programmed, the locos should be backwards compatible WRT protocol and respond to Train commands send using either the TMCC (Cab1) format or the TMCC2 (Legacy) format.  Program the Train with the Cab2 and see if it responds to Train commands using the Cab1.  The biggest issue you may encounter is speed steps - 32 under TMCC and 200 under Legacy.  A Train lashup of TMCC locos should be fine.  A Legacy Train lashup response is TBD.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×