Skip to main content

I was asked if I'd be doing Legacy Upgrades at York and as long as there is a demand I will continue to do them.

Current Legacy versions are 1.60 Base and 1.74 Cab2.  I can make and test modules (2 writable modules required supplied by you) for you to take home or I can update your base and Cab2 at York.  If there is a request for Friday October 18th we'll figure something out.  Please make sure your Base and Cab2 are at least above 1.0. If they are not it will have to be sent to Lionel.

We will do Base3 firmware upgrades provided that the iOS app update corrects the update issue.  I see no reason why it wouldn't be by then.  I also suspect that the B3SU will be available by then as well.  To be honest once both Apps are able to do the firmware update I  think this will be unnecessary but we'll see.

As we get closer I'll set a definite time but in the past 3pm-3:30pm in the Orange hall lobby to the left of the main doors worked well.  As long as you are standing there by 3:30 I will make sure we get you all set.

This is open to all whether on this forum or not.

If you don't have Black writable modules, Forum Sponsor Hennings Trains carries them.

Last edited by MartyE
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×