I recently purchased a Lionel 6-12054 Fastrack Operating Track. This is the track with the central magnet and the control rails are activated by remote control (Buttons or Legacy Remote). My intention was not to have a button for control on my table but to use it from my remote. I currently have a Lionel OTC 6-14185 that controls (2) two uncoupling tracks. They are programmed through the OTC. Hit ACC 1, Aux 1 controls one, and Aux 2 controls the other. They have been working fine. Now with my latest purchase of the Operating track, I want to add this combo uncoupler and control rails piece so I can dispense remotely the milk canisters from my milk car (3482). I want to use the Legacy remote and followed the instructions on Youtube to customize the 12054 track. I have added 4 wires to the right using the numbers, reprogrammed it (Remove jumper: ACC 98, set; ACC 1 set, replace jumper). All I get is the two uncoupler tracks programmed under ACC 1, Aux 1 and Aux 2. Am I missing something here, or are the uncoupler tracks and the operating tracks uncompatible? I did remove the wiring on the OTC for the uncoupler tracks and placed the 6-12054 track wiring in place and it did work. The question is can I use all three devices on my OTC 6-14185? If not what would work? Thanks for your help.
