Skip to main content

I mentioned in an earlier post that I was awaiting delivery of an MTH Milwaukee Road bus model. Well, the postman delivered it today.

 

Some forum members expressed a desire for more details, and so here they are.

 

This bus is solidly built out of die-cast metal, and is very well detailed for the price. ($24.95) Some of the detail paintwork could be better, but at this price one can hardly complain. I was pleased to see that the mirrors are painted silver.  I am 100% happy with this purchase, and it will shortly be parked beside my station.

 

The bus has a complete interior, with individual moulded seats. The bus can be dis-assembled easily by removing 4 screws on the underside. Once this has been done, the floor can be removed, and then the moulded interior seating can be lifted out. Later today I shall be fitting passengers and a driver to my bus. With any luck, I won't have to cut the feet off of the figures, as each seat has a footwell area.

 

Here are a few pictures of the bus as delivered.

 

DSC_0118

 

 

DSC_0119

 

 

DSC_0120

 

 

DSC_0121

 

 

DSC_0122

 

 

DSC_0123

 

 

DSC_0117

Attachments

Images (7)
  • DSC_0118
  • DSC_0119
  • DSC_0120
  • DSC_0121
  • DSC_0122
  • DSC_0123
  • DSC_0117
Last edited by N.Q.D.Y.
Original Post

Replies sorted oldest to newest

Thanx for the photos and the ideas for doing the interiors, Nicole.  I bought one of those, last fall and simply placed it near my "Union Station".  But now, with your encouragement, I'm gonna add some people to the interior.  3rd Rail offers some seated people in 1940's - 1950's clothing and I'm going to install some of them.  Great idea! 

 

I wonder if it would be fairly easy to install some lights, headlights, taillights, maybe ICC lights, too.  Be breat to see the bus outfitted this way.

 

I also have one yellow, Yellowstone, White Motors bus and also a red, Glacier Nat'l Park, "gear jammers bus" into which I've added passengers.  these were easy to do because they both have open sun roofs, through which I inserted figures, with a little bit of glue added to their little butts.

 

Thanx again for your photos.

 

Paul Fischer

Hi Paul,

 

I'm happy to be of some help. As far as fitting lighting is concerned, there is oodles of room inside the shell to fit the electronics etc. And interior lighting should be very simple with a few LEDs. But external lighting would involve surgery to the bodywork, as all of the lights are cast into the shell and painted. But it would be a fun project, and these buses are cheap enough to allow at least one disaster to occur.

Originally Posted by Lee Willis:

Nicole, great about putting figures in the bus, yes, but I particularly love the way you arranged them. You arranged them very realistically, spaced out leaving everyone as much room from the other strangers as possible, with the one pair together. Great attention to detail.

Lights do make a difference in seeing the folks inside too.

 

 

PICT4094

PICT4092

Attachments

Images (2)
  • PICT4094
  • PICT4092
Post
×
×
×
×
Link copied to your clipboard.
×
×