Skip to main content

Hi`, can any one help, i just purchased an MTH Galloping Goose, when i put it on my layout, it only makes Steam sounds and a Clank sound but won`t move in any direction at all, any and all help, would be greatly appreiciated                                                         Thank you , Sincerely, Phil

Original Post

Replies sorted oldest to newest

@Love trains-  Hey this may be no help at all, but I have the same "Goose" and it takes a 2 step process to get it to run the first time (and "first" means anytime the power has been off for an extended period).  This is actually iaw the directions which you may not have.  You have to power up the Goose then cut the power with your transformer then re-apply it and then the Goose will respond to direction commands.  You may have already done this but if not try it.  Cycle the power on your transformer as if you were trying to work an old e-unit .

Don

Add Reply

Post
This forum is sponsored by MTH Electric Trains
×
×
×
×
Link copied to your clipboard.
×
×