When I push program button green light flashes, as it should.
Then, for example, I press ACC 95, then set, the green light continues to flash at same rate.
Then, I press Aux1 1, the green light continues to flash at same rate.
It will continue flashing until I either turn the power off or I press the program button and it quits flashing.
When it is not flashing and I run a Legacy locomotive with an infra-red sensor, the green light will momentarily flash as the loco rolls over the track sensor.
I have the 81499 LCS power supply connected to the output of my Legacy base and the PDF connector directly to the sensor track. The power supply is plugged in.
How do I diagnose this issue to determine what is wrong?
