If this could be of any help, below are photos of a workaround done on a damaged WIU with power-usb-connector and some corresponding pcb traces removed.
The used parts are standard Male and Female Power Plugs 2.1X5.5mm
Thanks for all previous posts on the subject:
- https://ogrforum.com/topic/wiu-repair
- https://ogrforum.com/topic/mth...t-wiu-power-jack-fix
- https://ogrforum.com/topic/dcs...nit-is-it-repairable
- https://ogrforum.com/topic/wiu-power-source
- https://ogrforum.com/topic/mth...oken-power-connector
New power wires soldered:
Test completed before final mechanical installation:
Mechanical installation. Hole drilled between screw and led-light-pipe:
Workaround result (1of2):
Workaround result (2of2):
