Skip to main content

I thought I would put these up as a video was requested, the UP unit I had and made arrangements to give to Ed Golden to put in TMCC and Sound, the plan was to hand it over at the last S Fest, when I found the C&NW unit on American Models table, why I gave Ed some puppy dog eyes and convinced him to take them both.  Ed also put in directional lighting.  

Please don't mind the shaky iPad camera work. 

Ben

 

Attachments

Videos (2)
trim.0E7B468C-FBD6-47B7-A610-88CB03FE7296
trim.220CC092-9E8D-4D7A-85BB-DAE3FE2E0F64
Original Post

Replies sorted oldest to newest

I would like another run too, I hope that the same outfit that did the deco on the RS11 could do the deco on the SD60.  It's only shortfall, in my opinion, is that the paint decals/pad print could be better.  The RS11s are fantastic.  

A few more C&NW SD60s with the operation lifesaver markings would be awesome!!! 

Ben 

immage from the World Wide Web 

IMG_0545

Attachments

Images (1)
  • IMG_0545

Chris, just to let you know that my web site is dated and I no longer can make changes to it and when I get some time I will be swapping it over to a more modern program. I want to add some newer engines that I had done like the Northern with a fan driven smoke unit.  See youtube  https://youtu.be/jNkigHUw61M etc.

As for the UP, I put the speaker in the shell as there is no room in the fuel tank because the motor, drive shaft and mounting boards for the electronics are above it. This is a difficult installation as the motor mount needs to be milled down, the motor moved forward and new drive shafts are made.

IMG_0230IMG_0228

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×