Skip to main content

6 replies

Question About Programming Switch Tracks in the AIU

Rod StewartRod StewartOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

So I got my first 10 switches successfully connected to AIU1. And amazingly they all work, and throw in the right direction, the first time! (I think I'll go buy a lottery ticket or 2! ) So in playing around with the TIU I see that you can throw all to straight or all to curved. I have not played around much with the setup key, but I wonder if there is a way to reset all programmed switches to a startup condition; some straight and some curved? There is not much in the MTH manual about the switch setup button, and I couldn't seem to find any details in Barry's latest book.

Thanks for any help.

Rod

Original Post

Replies sorted oldest to newest

Barry BroskowitzBarry BroskowitzOGR Forum Member MEMORIALIZED MEMBER

Rod,

I wonder if there is a way to reset all programmed switches to a startup condition; some straight and some curved? There is not much in the MTH manual about the switch setup button, and I couldn't seem to find any details in Barry's latest book.

You didn't look hard enough!  

Pages 111-113 of The DCS Companion 3rd Edition has everything that you need to know to do exactly what you want to do.

I have a Route that resets every one of my 100+ switch tracks to their default positions.

DCS Book CoverThis and a whole lot more is all in “The DCS Companion 3rd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at OGR’s web store!
Rod StewartRod StewartOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER
Barry Broskowitz posted:

Rod,

I wonder if there is a way to reset all programmed switches to a startup condition; some straight and some curved? There is not much in the MTH manual about the switch setup button, and I couldn't seem to find any details in Barry's latest book.

You didn't look hard enough!  

Pages 111-113 of The DCS Companion 3rd Edition has everything that you need to know to do exactly what you want to do.

I have a Route that resets every one of my 100+ switch tracks to their default positions.

DCS Book CoverThis and a whole lot more is all in “The DCS Companion 3rd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at OGR’s web store!

OK got it done; no problem!  No sweat once you know how. Thanks again for the advice!

Rod

Add Reply

Views: 207
Post
The DCS Forum is sponsored by

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×