Hello once again everyone.
Burlington 2328 back in the day she was shiny silver colored. What did Lonel use for this exterior?
Well, mine is rough and I want spruce it up or maybe clean it. I don't expect a shine finish, but is it safe to clean? I don't want to make it worse. And the red frame, dirty too, anyone have suggestions?
Thank you one and all.
Leroof
Replies sorted oldest to newest
I would not recommend anything other than dusting with a paint brush. The silver will thin out once wet, and rub off very easily or stain. The lettering is very fragile too. Any silver engine is very tricky to clean. The red frame can be cleaned gently with mild dish soap and cold water.
Thank you Chuck.
A shell dusting only with soft brush. OK.
Chuck Sartor posted:I would not recommend anything other than dusting with a paint brush. The silver will thin out once wet, and rub off very easily or stain. The lettering is very fragile too. Any silver engine is very tricky to clean. The red frame can be cleaned gently with mild dish soap and cold water.
Very good advice thanks for providing it.
Access to this requires an OGR Forum Supporting Membership
