Skip to main content

I had one, and just bought two more, so now I have three of the Vision Steel-Sided Reefer Cars.

Before I assign ID's to these reefers, I read the Manual, Page 7 - last paragraph - and now I am not sure what ID's to use. The Manual says:

"If you have more than one VISION Reefer, for best results set them all to unique ID's. You may also choose to set them all to the same ID. In this case, set one reefer's min/max switch to the MAX position (see page 5), and all others to MIN..."

So which setting provides best results, a unique ID for each reefer, or all reefers with the same ID?

Thx!

Alex

Original Post

Replies sorted oldest to newest

Min I believe kills the dialog. So unless you want all the dialog from all 3 to sound using the min setting should give you all the sounds from each car using 1 ID without all the dialog but from just 1.  If you want any dialog from any car give them a unique ID set to max. Now when that car is addressed you can have dialog. 

Last edited by MartyE

I have e three (3) sets of these cars. I set them all to the same ID. Set all but one to Min - best way to use them. This way you get all the freight sounds and not all three cars saying the same thing at the same time. Also, allows you to have the TrainLink function available should you want to use it.

Go look at Eric's Train's  

Lionel Vision Line PFE Reefer 3-Pack

 https://www.youtube.com/watch?v=bwsNMECDNVc

Last edited by PSU1980

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×