I have 4 Cab-1 controllers and was wondering if they work with the Legacy Command Base (without the bells and whistles) of the Cab-2 remote or do I have to invest in additional Cab-2 remotes to have multiple users running the trains.
I'm pretty sure the only way to use them is to also use a TMCC base tied together to the Legacy Base using the Y cable that is provided with only the Legacy Base connected to the layout.
No, the CAB1 (black case) will only work with the matching TMCC BASE1. However, you can cable the TMCC BASE1 to the Legacy Command Base and then use the CAB1 controllers to control trains through the Legacy system.
The newer CAB1L (blue case) does talk directly to the Legacy Command Base.
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!