Skip to main content

im feeling the need to expand my o gauge. Right now ive got a reverse L of 4x8 plywood, adding at least 29inches to the lower end, possibly 12 inches to the top half, as seen in pic.  Is 77 adequate to run 072 fastrack, I can squeeze in a bit more if needed. I could run it beyond that stud.  Wanting to add a tunnel on top half and trestle somewhere in between.  Any suggestions, ideas?  I have tons of track, wish I had more space!  Thanks for the look!   AL83C498D9-A053-4C33-B1CE-BF32C8EE67A1

Attachments

Images (1)
  • 83C498D9-A053-4C33-B1CE-BF32C8EE67A1
Original Post

Replies sorted oldest to newest

Hi Al, I started out twenty some years ago with a 8 by 4 rectangular table. Then a year later a friend talk me into going bigger. Than  I expanded to an L shape lay out. One L  measured 16 feet  total other L measured 16 feet . Now twenty some years later I just added two more outside track loops around the perimeter. Much more fun. I now can run large big boy type engines on outside loops.

Attachments

Videos (1)
trim.12597907-422A-427A-8425-8E31C388710C

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR
×
×
×
×
Link copied to your clipboard.
×
×