Skip to main content

recently attempting to update my legacy base from version 1.52 to 1.60, I’ve discovered that the hardware is beginning to fail.  It won’t accept the software update, failing with the 6 flashes after attempting to update.  I contacted Lionel support and they are not longer repairing these, as expected.  Is there anyone out there that can perform a repair?

Original Post

Replies sorted oldest to newest

How would anyone but Lionel perform a repair on a proprietary microprocessor based system- that is failing an update- when Lionel would never release that source code and firmware on the chips a person would have to replace?

This is the same reason we cannot flash sound cards or change the programming on a RCMC.

There is no repair- only replace.

The rare exception is maybe something agnostic in the power supply section or a more mechanical failure like broken solder joint or a physical connector.

@Jimz posted:

recently attempting to update my legacy base from version 1.52 to 1.60, I’ve discovered that the hardware is beginning to fail.  It won’t accept the software update, failing with the 6 flashes after attempting to update.  I contacted Lionel support and they are not longer repairing these, as expected.  Is there anyone out there that can perform a repair?

Luckily the first batch of Base 3's are due by end of July!  So, you can get one of those to replace your 990 base.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×