Hey Folks,
I recently got a set of vinyl "dressed stone" sheets from JTT. I bought them to put on the vertical sides of my tunnel.
But my tunnel is built out of plywood. Any ideas of what I can use to stick the vinyl sheets to the plywood? (For some reason, I thought these would be a peel-and-stick product.)
Thanks for all advice.
Mannyrock
Replies sorted oldest to newest
I've never used the vinyl product (or for that matter, tried to adhere it to plywood), but I'd guess that 3M spray adhesive would be a good bet, which would potentially be removeable at need.
3M 77 Spray Adhesive
Yes, contact adhesives are the correct answer.
For future gluing needs, give this website a try:
Tells you how to glue most anything to anything else. Also has lots of valuable information about adhesives in general.
I would paint the plywood with Kilz water based primer to seal the plywood and give it a smoother less porous surface for the adhesive to stick too. E6000 adhesive would work well to hold the vinyl sheets on.
Charlie
@Choo Choo Charlie posted:I would paint the plywood with Kilz water based primer to seal the plywood and give it a smoother less porous surface for the adhesive to stick too.
Agreed.
Thanks for all of this excellent advice.
Mannyrock
Access to this requires an OGR Forum Supporting Membership
