Skip to main content

Does anyone have any record of the lengths of the straight sections for various Altas O Switches? Ive been a long time fastrack user and recently decided to make the switch to Atlas track. I’m likely going to use a fair amount of 054. Really what I’m getting at is what combinations of short straights are needed to equal the straight section of each switch length. I’ll probably be starting out with a large oval and will have only one switch so I need to make up the difference on the parallel straight. Thanks!

Original Post

Replies sorted oldest to newest

The online links to Atlas are not working…….but, from what I remember

AtlasO 36” and 45” diameter track switches are in 10” straights.

Atlas O 54” and 72” diameter curves have 14.5” straights…….however, there is a caveat……..the 72” is all one piece. The 54”  is 10” plus a detachable 4.5” straight to make 14.5” and gives you two options of incorporating it into a layout.

I don’t have my books with me…..so, I would back check my memory.

If you going to use Atlas track, you should purchase their layout book.

Peter

Thanks Peter. The book you’re referring to, is that the “36 Atlas O Layouts” book on their website?

Yes……..even if you don’t use their plans you get to see what the geometry looks like and for me, it was a source of ideas for my previous layout.

Peter

Attachments

Images (1)
  • mceclip0
Last edited by Putnam Division

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×