Hi all, under each section of Fastrack there are tabs that can be used to connect the track power. Can anyone either tell me what size female spade connector will slip over these or provide me with a direct link either with or without pigtails. thanks
Replies sorted oldest to newest
I believe they are .110 terminal connectors. You can get them at a variety of electrical supply houses or retailers.
I bought a bag of them several years ago to use with some FastTrack pieces and just crimped on my own wire leads.
They are .110 "Faston 110 Series" connectors.
Try these: AMP 880634-5
They also can be bought in packs of 10 or so in most Auto Parts stores such as AutoZone, Advance Auto Parts, or (preferably) your locally owned equivalent.
Agreed - very easy to do. This is a common question. For best results, size the connectors you are using to the wire gauge you are using. Also, some suggest using uninsulated connectors to fit in the tight spaces under some of the track sections. I would have a tiny screwdriver and a needle nose pliers handy to coerce some of the connectors together the first time.
..............
Access to this requires an OGR Forum Supporting Membership
