Skip to main content

2 replies

Controller and Power Setup - ZW C - 6-22982 and Base3

AlexWinslowAlexWinslowOGR Forum Member

Hello Friends,
I've returned to the hobby and building a mid-sized layout (12' x 15') with two main perimeter loops.  I have a few conventional locos from my childhood, but going forward plan to build a Legacy oriented control system as I build out my fleet.  I have the Base3 already.
Question:  I purchased an unopened new-in-box ZW C transformer 6-22982 at a really good price.  Is this a good combo with the Base3 for my power & control needs?  I do not have any Cab1 or Cab2 remotes yet, btw.  I've read other entries there may be compatibility issues and that the ZW L may be a better option (and much more expensive).  Ultimately, I want to build this out the right way, though.
Thanks!
Alex

Last edited by AlexWinslow
Original Post

Replies sorted oldest to newest

M MEDOGR Forum Member

There might be a problem, as you have stated. The problem is that the ZW-C will do a shut down - as if you hit the Halt function button - my misinterpreting a Legacy command. Some ZW-C's had a fix installed, others do not. Without tearing the ZW-C open to look at code level label on microprocessor IC, you just have to run and see it you get the unwanted "Halt" or not.

This thread was just posted a few days ago on this exact topic - please give it a read.

https://ogrforum.com/topic/dig...4#188804206413996824

Add Reply

Tags: Controller and Power Setup, ZW, Base3
Views: 63
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×