I would like to know the height of an Atlas O (scale) PS1 box car. Please take the measurement with the car on a flat surface (not a track) and measure from the flat surface top the top of the roof walk. I get a measurement of 3-15/16" for a scale Lionel box car and want to check Atlas O height for structural clearance for a model project.
Replies sorted oldest to newest
Atlas O PS-1 50' and MTH 50' PS-1 = 3-3/4" Only a 1/16th difference depending on spring truck position and roof walk. Some roof walks are bent up or down on Atlas.
Thank you! Prototype goes to laser next.
TAM: If you are interested in prototype clearances, refer to what are called "Clearance Plates" issued by the AAR. The subject was covered here at the Forum:
Access to this requires an OGR Forum Supporting Membership
