I am going to do it.

I would find another engine first to test it with. 

Lets look at this one step at a time. 

1) make sure the cab one is connected correctly and plugged in. I have seen plugs come undone or power strip tripped off and you think on. Also make sure throttle on transformer is turned up to at least 14V 

2) then I would check to see if when I hit the controller the base lights go on, if not 1st try putting new batteries in the hand held. ( I would anyway as sometimes you get the light to blink with low batteries but not enough to power the engine. ) 

3) If all above seems fine, try doing a reset with the engine. Sometimes you need to do a reset with the engine. 

rtraincollector posted:

I would find another engine first to test it with. 

Lets look at this one step at a time. 

1) make sure the cab one is connected correctly and plugged in. I have seen plugs come undone or power strip tripped off and you think on. Also make sure throttle on transformer is turned up to at least 14V 

2) then I would check to see if when I hit the controller the base lights go on, if not 1st try putting new batteries in the hand held. ( I would anyway as sometimes you get the light to blink with low batteries but not enough to power the engine. ) 

3) If all above seems fine, try doing a reset with the engine. Sometimes you need to do a reset with the engine. 

I will give it a try.Oh and thanks

I think I may need to clean the track.I not sure if that has anything to do with it.But I gonna try cleaning the track.I also gonna clean the pick up rollers on the locomotive.

Let us know what you find out