Skip to main content

Working on a gray 785 Hudson.  The three wire connectors to the SOS/whistle were removed/lost and the new owner of the engine would like them replaced.

I have three wires coming out of the circuit board in the tender (brown, black, blue) and nothing from the back of the engine/brushplate.

I have a pair of spare connectors with wires attached.  I just need to know which gets soldered to where on the engine brushplate.

Thanks in advance,

John

Original Post

Replies sorted oldest to newest

Here’s a pic of a 785 from the back if that helps....one black wire goes to the grounding lug, ( engineers side, lower corner ) the other black wire goes to the jumper lug ( engineers side) the blue center wire goes to field hot ( center lug ) .....take a look how I left the plug facing with the pins oriented the way they are....hopefully, you can distinguish which way it faces.....

PatEA188130-17D1-495E-9CBB-AF703A48D3E36E3618C1-D7BC-4156-A15C-4D5103800937

Attachments

Images (2)
  • EA188130-17D1-495E-9CBB-AF703A48D3E3
  • 6E3618C1-D7BC-4156-A15C-4D5103800937

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×