Skip to main content

3 replies

Lionel ASC's for my switch yard and turnouts.

T thebeemanOGR Forum Member

Hi Guys

The latest info that I can gleam from the net is using the above units for flipping my switches is a good thing according to Lionel Legacy.  Back in 02, I think I used a duel push button.  It was a PITA to wire and use but it worked.  Looking ahead toward the next level. I'm keeping my old switch units that are usable, New ones will be new RCS / DZ1000's.  All my switches are RCS/DZ1000's. Got a heck of a lot more switches now  Please give me your pro's and con's. on this setup.  I ain't looking at accessory's now.  Later on for sure.

Life is Good and my best regards,

Tommy

Original Post

Replies sorted oldest to newest

M martindOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I used asc's , over 5 of them chained together, with my legacy system for a number of years to control tortoise machine switches.  The controllers are very reliable and have never has a problem with them.  I did use the DZ switch machines early in building my layout and found the DZ-2500 and 1000 to be more problematic to get to work.  But they were easier to install than the tortoise machine.

Marty

Add Reply

Views: 249
Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×