Looking for some help on sections

Make the hills and tunnel separate from the benchwork with extended "flaps" at the bottom that you can just blend in with the scenery.  When you need to take apart the sections just lift and remove.   Or only build to the edge of each section and cover the seams with some scenic element if it can be easily seen. 

-Greg

Would you post the SCARM file? It's kind of hard to see things with a tilted 3D image.

Sorry for the long delay.  Here is the scarm file.

Thanks again

Chris

Thanks. I suspected it was all 1 level, but the 3D view made me question the bridge being raised.

Anyway, not knowing exactly what size sections you'd be comfortable with, I took a stab to generate some discussion. Notice I moved the lower left crossover further to the left so you could make a 48"x72" section separated at straight tracks. I kept the bridge on another section that is 50"x60", again separated at straight tracks. The 3rd section has the mountains and is 32"x84". The mountains can overlap on the right, but the overlap would "float". The last section has the yard and it separates on a curve, but only a single track, so joining shouldn't be too much trouble. The yellow, green and maybe blue sections could be further cut in half horizontally. If you do that with the blue section, you'd could make the mountains removable.

.

Thanks that looks great.  I may cut the sections you mentioned up as well.  I hope to only move this thing once annually and not very far at that.   There will be some interesting turns to negotiate though.  Thanks again.

Chris

You're welcome, Chris.