All of a sudden my engine stopped smoking and the on off button did no good. Put in 3 drops in case it went dry and no good. I then checked other functions like whistle etc and all were goofed up. Went to programing and deleted the engine. Then called it up again and it was weird. Track signal was a 10 but the hand held cound not find it but as soon as the note not found disappeared it said it was found and put the right printing on screen. Tried to put back menu functions back where I wanted them and could not get all to work. I pushed menu button and first volume bell, whistle, eng vol, but after that I could not scroll to each function. I would skip some and just get all miked up. I pull aux power plug to tiu, with track voltage off and waited 20 seconds and put back aux power in tiu. Red light came on and blinked 3 times as it always has. Tried engine and it ran but terrible jerky, but speeded it up and let it run for awhile and after about 10 minutes it ran good even at speed step 3, but still no smoke of any advanced programing will work. Help please and thanks for any suggestions.
Original Post
