Hello!
As some may know I have the EnzoVille, but now I have the EnzoVille II project!
The place is in my father's house that is on the same street!
I made a draft of a first idea with AnyRail program, but I already buy RRtrack, but I have a doubt to buy the package, it must choose the rail.
I'll change Fastrack to Gargraves or Atlas? What do I use?
In the draft I did a reverse, but do not know if it was the best option, accept ideas.
Well this is only a start.
Thank you as always !!
Replies sorted oldest to newest
Atlas is having a lot of trouble delivering product right now. I'd go Ross or Gargraves
Hello Leandro,
I have a track plan suggestion. Move the entrance to the RH\TT to increase track length and reduce the slope of the elevation. A diagram is attached.
Atlas is having a lot of trouble delivering product right now. I'd go Ross or Gargraves
Thank you, Chris!
I also think that the cost Atlas is expensive. I compared prices and the rail Atlas Flex this $ 20.00 and $ 10.00 Gargraves U !!
I have doubts! Using switch Ross, which drive mechanism can I use? Because from what I understand he does not come with the mechanical drive. Am I correct?
Hello Leandro,
I have a track plan suggestion. Move the entrance to the RH\TT to increase track length and reduce the slope of the elevation. A diagram is attached.
Carl, no problem with the language!
Thank you for the tips, I will change the entry to the turntable and will need to plan one, because today I have an atlas, but want a bigger!
I think when you have the rrtrack, I will get better and be in 3D view!
What do you think of the track Gargraves / Ross?
The Gargraves|Ross combination is very nice. You can purchase the Ross ready switches with the Z-Stuff switch machines and they are the same price as an Atlas switch with a motor. They switch quickly, like FasTrack. They can also be controlled by TMCC\Legacy or DCS.
Gargraves flex track is much easier to use than Atlas. On my layout, I am using Gargraves track with Ross switches. Gargraves and Ross use identical track pins. Making up the pieces are no problem.
Gilly
The Gargraves|Ross combination is very nice. You can purchase the Ross ready switches with the Z-Stuff switch machines and they are the same price as an Atlas switch with a motor. They switch quickly, like FasTrack. They can also be controlled by TMCC\Legacy or DCS.
Carl, thanks !
Perfect, because I already use SC-2(lionel) with switch fastrack.
Gargraves flex track is much easier to use than Atlas. On my layout, I am using Gargraves track with Ross switches. Gargraves and Ross use identical track pins. Making up the pieces are no problem.
Gilly
Gilly, Thanks !!
It is good to know!
I'm in the RRtrack site to buy, as I want the Gargraves / Ross / MTH accessories.
I believe that the best is the complete package RRT-50A-OGS3, am I correct?
Thanks !
Leandro,
Yes, that is a good package for a modern O gauge model rr design.
Access to this requires an OGR Forum Supporting Membership
