So I'm running a trolley (6-18419) under the tree for Christmas. I have it running on a PowerMax transformer (50W). If i run it at 50% power it runs fine, though hits the bumpers sort of hard. If i drop it to 40% it slows down at one point on the side opposite the power source, and if I lower it to 35% it hangs up at that spot. Is it a faulty/dirty connection in the FasTrack, is that just too low of a setting for a trolley, or do I need to oil the trolley a bit?
Thanks.
Replies sorted oldest to newest
Add a power wire to the center rail there and a ground wire to an outer rail there.
If it's under a Christmas tree I'm imagining it's not that large / long of run. I would suggest cleaning the track/wheels and checking your connections for continuity. My first thought is bad continuity/connections.
H Deuce, I think Readinffan is saying, add another power drop to the other end along with a ground. do a test run and let us know how it works out!
Thanks guys. I'll clean first and then grab some supplies (hopefully tomorrow, I have wire but no disconnects) if that doesn't work. I'll be back in touch!
Deuce posted:Thanks guys. I'll clean first and then grab some supplies (hopefully tomorrow, I have wire but no disconnects) if that doesn't work. I'll be back in touch!
Try this, as well:
https://ogrforum.com/...ne-up-that-fasttrack
Mitch
Access to this requires an OGR Forum Supporting Membership
