Ross Switch: Reverse red/green LEDs with pliers?? | O Gauge Railroading On Line Forum

Terry DanksOGR Forum Member

So say the instructions.

I had to relocate my DZ1000 motors as the pilots of some steamers were hitting them.

Now the DZ-1002 switch has the LED red/green colours correct but they are reversed on the DZ-1000.

Instructions say to use pliers to pull the LEDs. PLIERS!!!! I tried tweezers. They just slip off the bulbs.

Before I break the LEDs with pliers, anyone actually done this successfully? Pulled the LEDs from a DZ-1000 with needle nose pliers without breaking them?

4/9/162:33 PM

Original Post

Replies sorted oldest to newest

rtr12OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I have done it and it works, just don't squeeze hard with the pliers. They were not in there as tightly as I thought and actually came out pretty easily.

4/9/162:56 PM

Terry DanksOGR Forum Member

Many thanks, RTR.

I got my smallest needle-nose and used my lightest grip. Success!

4/9/163:36 PM

Mike CTOGR Forum Member

Note that there is a flat side to the LED that needs to be turned 180 degrees. Note the flat bottom red LED. The green LED is flat on the top, this picture.

4/9/166:07 PM

AlanRailOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

You can only do this with the DZ1000s can't do this with the DZ2500s.

Although you cannot re-position the LEDs on the DZ2500 you can alternate the red/green based on the through-arm position with the internal software.

I saw Dennis do this once and have no idea how to do it again.

4/9/167:01 PM

Add Reply

Sign In To Reply

<div id="{%=id%}" class="reveal-modal small h-alert-modal-popup" data-reveal>
    <div class="first-modal-focus focus-utility-element" tabindex="0" aria-label="Inside Modal"></div>

<h4 id="{%=id%}_title" class="margin-bottom-10 popup-title"></h4>
    <div id="{%=id%}_body" class="margin-bottom-10 popup-body">
        </div>

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>