Skip to main content

Replies sorted oldest to newest

 
 

Thanks for all the encouraging words. I bit the bullet and put a 20X30 addition on our garage last April and finished the inside bit by bit. Last winter was not much "fun" on the dairy farm where I work, so I negotiated the winter off. I'll go back at corn planting time and work the summer and fall. Now it's train time. Pingman, you're right on on the benchwork. I have the 1980 edition of his book in front of me all the time. The table is a 7' U shape around the room, 20' long. I had to leave room for a treadmill for you know who and a workbench opposite that. I don't have a track plan set yet. I have the older version of RRTrack, but never really mastered it. I'll post a couple of possibles and look for reaction from the gurus I so much enjoy on this forum.

John

 

All finished with "this" and going full time on "that". I have attached the track plan I am using as a base. I have to modify the right side of the U because  my U is 7' on both sides. I have 18" around the outside and 2' in the center. I don't have a turntable, but would like to work in a yard on that side. I am hoping to use O-72 and O-60 in place of the O-84 and O-72 on that side. I am using Fastrack because I have plenty from the old layout. I will greatly appreciate any advice, comments, or help with changing the right side.

John

Attachments

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×