The print should take about 90 minutes. the bottom parts are the circuit mock-ups to get the sizing correct and holes "drilled". To use with Ross Custom (not gargraves) track cut out four(4) ties and stringers, install circuits in holder then slip under rails, paint and add ballast as desired. And of course plug in.
I may add wood surface, tie clips and ballast at some point.
Replies sorted oldest to newest
Looks great! Any plans to do them for Atlas track?
I don't have any Atlas Track to use as a template.
If you send me a piece I'll see what I can do.
That's a good idea, looks good too!
Care to share the design file? 
I second GRJ's request. My son has a printer, I'd love to have him print me up one for my Ross Track. Do we need to email you and ask for a copy of the design file ?
yes all of my designs are share-able.
these are Rhino 6 files that I can convert to .STL and .OBJ format for most 3D printers.
let me finish it though, usually i put them on Shapeways for those without printers.
it's because of the H10 that i needed to incorporate the sensor track.
AlanRail posted:I don't have any Atlas Track to use as a template.
If you send me a piece I'll see what I can do.
Will do. I'll send you an email.
Bob
By all means, finish it before you give it to us! 
BTW, what design program do you use?
Rhino6 is the design program; I know it well enough. . . not real well!
here is the first draft print:
see one hole missed;
need to enlarge the holes! make the ties a bit bigger.
the lettering should be more pronounced;
ah rapid proto-typing!
How about I send you some GarGraves track? Would you make one for me and maybe others here on the forum???
Access to this requires an OGR Forum Supporting Membership
