My train room has a dimmer switch that can dim the room lights. The issue is every time I turn off the switch the little dimmer slider moves!; So the room lights are never the same, but I really want the light to be full-on most if not all but most of the time.
So I designed and then 3D printed the DIM-LOK (tm). See below
the DIM-LOK inserts into the dimmer slot to lock the dimmer slide switch to the high position, so that each time I turn on the light it comes on full. See below:
now the lights come on high all the time, until I remove it to intentionally dim the train room lights.
