First Permanent Plans

Hi millerman61,

I made some fitment adjustments. Attached is a FasTrack lengths chart to help you with fitment. I also think that you should set the elevated at 7.5". Then you have plenty of clearance in the tunnel portals.

I couldn't tell if the table was 9.5' or 10' long. Tell me the table length and I'll convert the fitment corrections to RRT and post the file.

It looks like a nice runner.

The length is 9.5'.  That leaves me enough space to get around the benchwork I am planning.  That is the next part of the project.  I am not anywhere near what you would consider a carpenter.

Thanks for the suggestion about the track2 height.  I will make sure that is changed.

here's my version. It all fits. I had trouble with your file. I just made a 12 x 12 room and the benchwork is the same.

You may be able to rework the figure 8 fitment. The straight between the switches is a strange length that affects the cross fitment.

Carl

Thanks for taking the time to help clean this up for me.  I'll definitely use the suggestion for the higher height on the raised track.

You are welcome, no problem.

There is enough space to add some accessories or some decent scenic items and a siding or two. Depends on what you want your railroad to do.

It is an occasion when a rr get lease rights for trackage.

Have fun!