Skip to main content

Hello,

I have a Lionel 2004 Catalog 6-24529 F3 Santa Fe Warbonnet that at normal speeds stalls in Fastrack Command Switches and then a second later resumes set speed! All my switches are 048 and 072. The 048 Switches are remote and NOT Command switches just to clarify. Note: This model was fresh out of a unopened box, factory sealed as of July 2020. Sat on the shelf for a few years!!! It's a beautiful model, just doesn't run very well. I looked for months until I found this TMCC F3 Warbonnet!!! I did check to see if the 3rd rail rollers were both getting power (18vac), and based on my check they were. Any ideas what the issue might be?

Thanks,

Scott

Original Post

Add Reply

Post
This forum is sponsored by Lionel, LLC
×
×
×
×
Link copied to your clipboard.
×
×