I own a lionel JLC Allegheny 2-6-6-6 locomotive. I bought a lionel legacy 990 command control and want to know if it is compatible with my locomotive.
Replies sorted oldest to newest
Legacy is compatible with every AC Lionel train except LionChief models if you include a PowerMaster for non-TMCC and non-Legacy models.
What, me worry?
what is the 6- number?
Okay, thank you. I have tried to program the locomotive and nothing happens. Anyone have any suggestions on what I should do.
poolboy posted:Okay, thank you. I have tried to program the locomotive and nothing happens. Anyone have any suggestions on what I should do.
what is the 6-number????
The Legacy system talks in two modes. Full Legacy and TMCC. Once you have programmed the engine number, then press the INFO button and see what mode you are trying to communicate with your engine.
Is your engine #6-38081?
choochoopaul posted:The Legacy system talks in two modes. Full Legacy and TMCC. Once you have programmed the engine number, then press the INFO button and see what mode you are trying to communicate with your engine.
have we even determined if the engine is legacy?
It's TMCC - with odyssey circa 2005
prog/run switch to prog
legacy base on
transformer on
eng headlight on?
Press eng #(id number that you wish)
press set - confirmation light or sound?
power down
return switch to run
power up and test
see pages 24 & 25 of the manual (attached)
Attachments
Gentlemen,
MoonMan (Carl) is correct in his programming/testing of the Cab2. The engine in question is TMCC/odyssey not Legacy.
I have a JLC TMCC/odyssey GG1, drove me nuts programming it the 1st time, glad Carl put the programming sequence right one the OGR for everyone to see.
When my 990 Legacy returns form the Lionel repair shop, I will need to re-program my 249ERR into the Legacy base unit, probably will need Gun Runner John to help me remember how to actually do it. Even the Lionel educational video on this one is confusing.
PCRR/Dave