Lionel Transformer No. 1033, 90 Watts

Thank you very much,  Bob.

"U" has the throttle, direction, & whistle/horn controls all for the center rail power, so that should be connected to Lockon Clip 1.

Adds clarity, much appreciated - Tks, Bob.

Note that the output of the 1033 is on the order of 65-70 watts maximum, PW transformers were rated on input power, not output power.

Thank you, I wasn't aware.  Another question, for an accessory, using a field light as an example, if I use a lockon just for a light, the bulbs get brighter as I give more power to the engine, the reverse is also true.  How would you recommend this light be connected ?  Bring the wiring back directly to the transformer ?  And if using the Model 1033, which posts would you connect it to, U, A, B, or C ?  Appreciate the help - Bob.

If it's just used as a light and not connected to the track, you can connect it to the fixed voltage outputs.  Between B and C will give you 11 volts, about right for that lockon I imagine.

@RLS, please take a look at the attached booklet - it tells you everything you need to know to get started:

Here is the Table of Contents:

Here is showing how to wire your lights and accessories independent of the track:

Here is a link to the rest of the document:

Download: https://ogrforum.com/...sories%20%201954.pdf